HELP

OSU ListProcessor (listproc@lists.acs.ohio-state.edu)
Sat, 28 Sep 1996 08:10:44 EDT

ListProcessor 7.2

Copyright (c) 1993-95 by
the Corporation for Research and Educational Networking (CREN)

Here is a brief description of the set of requests recognized by ListProcessor.
Everything appearing in [] below is optional; everything appearing in <> is
mandatory; all arguments are case insensitive, except mail addresses and
passwords. The vertical bar ("|") is used as a logical OR operator between
the arguments. Requests may be abbreviated, but you must specify at least the
first three characters.

Keep in mind that when referring to a <list>, that list may be of two kinds:
local or remote, unless otherwise noted. When referring to a local list, your
request will be immediately processed; when referring to a remote list (a list
served by another ListProcessor which this system knows about), your request
will be appropriately forwarded. Issue a 'lists global' request to get a
listing of all local and known remote lists to this ListProcessor.

Recognized requests are:

*** GENERAL ***

help [topic]
------------
Without arguments, this file. Otherwise get specific information on the
selected topic. Topics may also refer to requests. To learn more about this
system issue a 'help listproc' request. To get a listing of all available
topics, generate an error message by sending a bogus request like 'help me'.

lists [local|global [keywords]]
-------------------------------
Get a list of all local mailing lists served by this server, or of all known
local and remote lists. If keywords are specified, they are treated as a
logically ANDed list of strings/regular expressions; keywords can be quoted.
When keywords are specified, only those lists' descriptions that match the
keywords are listed.

release
version
-------
Get information about the current release of this ListProcessor system.

*** FOR LISTS ***

information [list]
------------------
This file if no list is specified, otherwise get information about the
specified list.

purge <password>
----------------
Remove yourself from all mailing lists on this host.

recipients <list>
-----------------
Get a list of the current subscribers.

review <list> [short|description|subscribers]
---------------------------------------------
Review the list's settings, get the list's general information file and get a
listing of the current subscribers for the specified list.

run <list> [<password> <cmd [args]>]
------------------------------------
Run the specified command with the optional arguments and receive the output
from stdout and/or stderr. To get a listing of all available commands to run,
omit the arguments, i.e. issue a 'run <list>' request. You have to belong to
the specified list, and must have obtained the password from the list's owner;
the owner's address may be found in the Errors-To: header line of each
delivered message.

set <list> [<option> [arg[s]]]
------------------------------
Without the optional arguments, get a list of all current settings for
the specified list. Otherwise change the option to a new value for that
list (or the list default if that value is missing).
Valid arguments are: mail [ACK|NOACK|POSTPONE|DIGEST]
password <current-password> [new-password]
address <current-password> <new-address>
conceal [YES|NO]
preference [preferences]
Issue a 'help set' request for more information.

query <list>
------------
Same as 'set <list>' with no arguments.

statistics <list> {[subscriber email address(es)] | [-all]}
-----------------------------------------------------------
Get a listing of non-concealed subscribers along with the number of messages
each one of them has sent to the specified list. If the optional email
addresses are given, then statistics will be collected for these users only.
For example:
stat foo user1@domain user2@domain
will generate statistics about these two subscribers. "-all" compiles
statistics for all users that have posted on the list (whether currently
subscribed or not).

subscribe <list> <your name>
join <list> <your name>
----------------------------
The only way to subscribe to a list.

unsubscribe <list>
signoff <list>
------------------
Remove yourself from the specified list.

which
-----
Get a listing of local mailing lists to which you have subscribed.

*** FOR ARCHIVES ***

afd <action> {<archive> [/password] [files]} [{<archive> [/password] [files]}]...
fui <action> {<archive> [/password] [files]} [{<archive> [/password] [files]}]...
---------------------------------------------------------------------------------
Automatic File Delivery (AFD) and File Update Information (FUI). Add/delete
yourself to archives and/or files, and be notified when these archives or
files are updated. "action" can be: add, delete or query. The site's manager
may manipulate other addresses by listing them after the archive
specification(s).

archive <archive name> <password> <action> [args]
-------------------------------------------------
Manipulate archives; the manager may create new archives, remove existing
ones, or reconfigure existing ones. Both the manager and the archive's owners
may add, delete or update existing files.

fax <fax-number> <archive | path-to-archive> <file> [/password] [parts]
-----------------------------------------------------------------------
Same as 'get', but it faxes you the files instead to the specified number.

get <archive | path-to-archive> <file> [/password] [parts]
----------------------------------------------------------
Get the requested file from the specified archive. Files are usually split in
parts locally, and in such a case you will receive the file in multiple email
messages -- an 'index' request tells you how many parts the file has been split
into, and their sizes; if you need to obtain certain parts, specify them as
optional arguments. If an archive is private, you have to provide its password
as well.

index [archive | path-to-archive] [/password] [-all]
----------------------------------------------------
Get a list of files in the selected archive, or the master archive if no
archive was specified. If an archive is private, you have to provide its
password as well.

search <archive | path-to-archive>] [/password] [-all] <pattern>
----------------------------------------------------------------
Search all files of the specified archive (and all of its subarchives if -all
is specified) for lines that match the pattern. The pattern can be an
egrep(1)-style regular expression with support for the following additional
operators: '~' (negation), '|' and '&' (logical OR and AND), '<' '>' (group
regular expressions). The pattern may be enclosed in single or double quotes.
Note: . matches any character including new line.

view <archive | path-to-archive>] [/password] [parts]
-----------------------------------------------------
Same as 'get' but in interactive mode justs catenates the file on the screen.

*** FOR LIST MANAGEMENT ***

Below, <password> refers to the list's password:

[quiet] add <list> <password> <address> <name>
[quiet] add <list> <password> {<address> <name>} {<address> <name>} ...
-----------------------------------------------------------------------
Add the specified user(s) to the list. If more than one user is added you need
to enclose each one in {}. If quiet, the user(s) will not be notified.

approve <list> <password> <tag> [tag] ...
-----------------------------------------
Approve the message(s) identified by the tag number(s) for posting to the
specified moderated list -- applies to moderated-no-edit lists only.

configuration <list> <password> [<option> [args] [, <option> [args] ...]]
global configuration <password> [<option> [args] [, <option> [args] ...]]
-------------------------------------------------------------------------
Get or set a list's or all lists configuration options; only the manager can
globally change parameters; without any of the options below,
get the current settings. Options are a comma-separated list of one or more of
the following keywords (options marked with * can be issued by the manager
only; options marked with + are relative):
* ARCHIVE [dir] [filespec] [arch-name] [password] [messages|digests]
ARCHIVE [password] [messages|digests]
NO-ARCHIVE
* COMPRESSED-ARCHIVES
* UNCOMPRESSED-ARCHIVES
ARCHIVES-TO-ALL
ARCHIVES-TO-OWNERS
ARCHIVES-TO-SUBSCRIBERS
AUTO-DELETE-SUBSCRIBERS
NO-AUTO-DELETE-SUBSCRIBERS
CLOSED-SUBSCRIPTIONS
OPEN-SUBSCRIPTIONS
OWNER-SUBSCRIPTIONS
WIDE-OPEN-LIST
COMMENT <string>
NO-COMMENT
DEFAULT <mailmode> <value> [<mailmode> <value>] ...
address variable|fixed
mail ack|noack|postpone|digest
password <string>
conceal yes|no
+ preference CCoption
+ DELIVERY-ERRORS-TO <address> [address] ...
+ REMOVE-ERRORS-TO <address> [address] ...
DIGEST <frequency> [when] [lines bytes]
daily hh:mm
weekly Sunday|Monday|Tuesday|Wednesday|Thursday|Friday|Saturday
monthly
NO-DIGESTS
+ DISABLE <request> [request] ...
+ ENABLE <request> [request] ...
+ SET-DISABLE <mode> [value] [<mode> [value]] ...
mail ack|noack|postpone|digest
conceal yes|no
password
+ SET-ENABLE <mode> [value] [<mode> [value]] ...
mail ack|noack|postpone|digest
conceal yes|no
password
FORWARD-REJECTS
DONT-FORWARD-REJECTS
KEEP-RESENT-LINES
DONT-KEEP-RESENT-LINES
REFLECTOR
NO-REFLECTOR
HIDDEN-LIST
VISIBLE-LIST
* PUBLISHED-LIST
* UNPUBLISHED-LIST
* MANAGER-CONTROLLED
* OWNER-CONTROLLED
MAX-MESSAGES-PER-DAY <number>
MESSAGE-LIMIT <number>
NO-MESSAGE-LIMIT
+ MODERATED-EDIT [address] ...
+ MODERATED-NO-EDIT [address] ...
UNMODERATED
+ REMOVE-MODERATORS <address> [address]
+ OWNERS <address> [address] ...
+ REMOVE-OWNERS <address> [address] ...
PASSWORD <string>
+ SUBSCRIPTION-MANAGERS <address> [address] ...
+ REMOVE-SUBSCRIPTION-MANAGERS <address> [address] ...
REMOVE-ALL-SUBSCRIPTION-MANAGERS
REPLY-TO-LIST
REPLY-TO-LIST-ALWAYS
REPLY-TO-SENDER
REPLY-TO-SENDER-ALWAYS
REPLY-TO-OMITTED
REVIEW-TO-ALL
REVIEW-BY-ALL
REVIEW-TO-OWNERS
REVIEW-BY-OWNERS
REVIEW-TO-SUBSCRIBERS
REVIEW-BY-SUBSCRIBERS
STATISTICS-TO-ALL
STATISTICS-BY-ALL
STATS-TO-ALL
STATS-BY-ALL
STATISTICS-TO-OWNERS
STATISTICS-BY-OWNERS
STATS-TO-OWNERS
STATS-BY-OWNERS
STATISTICS-TO-SUBSCRIBERS
STATISTICS-BY-SUBSCRIBERS
STATS-TO-SUBSCRIBERS
STATS-BY-SUBSCRIBERS
SEND-BY-ALL
SEND-BY-OWNERS
SEND-BY-OWNERS-CONFIRM
SEND-BY-SUBSCRIBERS
SEND-BY-SUBSCRIBERS-CONFIRM

[quiet] delete <list> <password> <address> [address] ...
--------------------------------------------------------
Delete the specified address(es)/users from the list. If quiet, the user(s)
will not be notified.

discard <list> <password> <tag> [tag] ...
-----------------------------------------
Discard the message(s) identified by the tag number(s) sent to the specified
moderated list -- applies to moderated-no-edit lists only.

edit <list> <password> <file> [-nolock]
---------------------------------------
Obtain the specified file for editing; file can be one of:
subscribers, aliases, news, peers, ignored, info, welcome
Without -nolock, the file will be automatically locked.

free <list> <password>
----------------------
Resume delivery of a held list, or reset the daily message count to zero. If
the manager held the list, only he can free it.

hold <list> <password>
----------------------
Suspend distribution of messages.

initialize <manager password> [<list alias> <list address> <configuration options>]
new-list <manager password> <list alias> <list address> <configuration options>
---------------------------------------------------------------------------------
Initialize a new list, or tell the server to reread the master config file.
Can be issued by the manager only.

lock <list> <password>
----------------------
Suspend execution of list-specific requests and queue them up for later
processing. Owners may still issue such requests, unless the list is locked
by the manager.

purge <password> <address> [address] ...
----------------------------------------
Remove the specified address(es) from all mailing lists on the local host.
Can be issued by the manager only. All users are removed quietly.

put <list> <password> <keyword> [args]
--------------------------------------
Manipulate addresses and change system files. Keywords and args can be:
keyword: alias|ignore|subscribers|aliases|news|peers|ignored|info|welcome
args: email address for alias|ignore
When putting a file, its contents start immediately after the request and span
the entire message.

reports <list> <password>
-------------------------
Obtain all reports about the specified local list.

[quiet] set <list> [<option> [arg[s]]] for <address> [address] ...
------------------------------------------------------------------
Same as 'set' above but applies changes to specified address(es). If quiet,
the user(s) will not be notified.

system <list> <password> <user-address> #user-request
-----------------------------------------------------
Issue any request on another user's behalf.

unlock <list> <password>
------------------------
Resume execution of list-specific requests, including those queued up while
the list was locked. All owners may unlock a list, unless it's locked by the
manager.

*** OTHER ***

Help is also available on the following topics:

listproc
--------
Learn more about this system and list management software in general.

live
----
Learn how to connect to this ListProcessor over the Internet for live
processing of your requests.